Tag Archive for oil change

The Basic Steps to Changing Your Oil

changing your oil - Larry Jay Mitsubishi BlogOne of the most common car maintenance activities is an oil change. Most vehicles need an oil change once every three months or every 3,000 miles, assuming it requires a non-synthetic oil. While our professional staff at Larry Jay Mitsubishi can perform this type of maintenance for you, many drivers prefer to do it themselves. That’s why we’ve put together a post on changing your oil.

According to Edmunds, you’ll need a few tools. This includes a wrench that fits the drain plug, an oil filter wrench, oil drain pan, funnel, a jack, and jack stands. You may also prefer to use latex gloves to protect your hands. You should also have fresh oil and a new oil filter.

First, raise the car using the jack, and secure it using jack stands. Next, position the drip pan under the oil plug. Following this, you can remove the oil plug and let the oil drip from the car into the pan you have under it. You’ll need the pan when removing the old filter as well, as oil will drip from this part of the engine.

Next, replace the drain plug and the new oil filter. Many technicians suggest rubbing the gasket of the new oil filter before installing it to ensure a tight fit.

Finally, fill the car with fresh oil. You may need to check the dip stick a few times to be sure that it’s full. Then, remove the blocks and lower the car. It’s as simple as that.